I have two Moore 3400s for sale. $2500 each or take both for $4500. Both are used but in very good operating condition.
They are located in Alabama so youll have to pay for shipping.
MOORE 3400
Heavy Duty Detacher
The Moore 3400-06 heavy-duty detacher with trim winder is a quiet machine built for heavy duty processing and ease of use. The
Moore 3400-06 has heavy-duty tractors and breaker blade for high-volume slitting and detaching. Heavy-duty tractor slitters, last form shut-off feature and last form eject feature are standard on every machine. The conveyor stacker comes with 2-position backstop. The 3400-06 has edge detectors for full form jam detection. The 3400-06 will detach up to 14-inch form depths. With its 2- button operation, the 3400-06 is easy to operate. The 3400-06 is exceptionally quiet, steel construction and fits the decor of most offices and print centers. It can be equipped with a
built on Slitter Merger unit for two wide interstacking and bursting.
Machine Specifications
Size: 43" H x 31.4" W x 39" L
(68.5" L w/conveyor)
Shipping Wt: 670 lbs. with trim rewind
Power: 3/4 HP, 115 Volts, 60 HZ, 10 Amp.
Speed: 30 to 400 FPM
Heat: 3925 BTU
Forms Specifications
Width: 4-1/2" to 18" (6-1/2" min. w/mid-form
slitter)
Length: 2-1/2" to 14"
Imprinting length: 2-1/2" to 11"
Paper Wt: 11-1/2 lb. to 125 lb. (Single Part)
Capacity
1 to 4 parts, carbonless or carbon interleaved,
temporarily or permanently fastened.
5 and 6 part should be tested prior to sale.
(Based on 12" wide forms using 12 lb. bond
and regular weight carbons.)
www.usedpressuresealequipment.com
Location: New Hampshire
its NOT ok to contact this poster with services or other commercial interests
